TOP is a professional electronic components distributor in China.
we offer one-stop solution service , from communication modules , antennas , PCB , PCBA , and all components for PCB Bom.
Product Details:
Payment & Shipping Terms:
|
Function: | Step-Up, Step-Down | Output Configuration: | Positive Or Negative |
---|---|---|---|
Topology: | Buck, Boost | Output Type: | Adjustable |
Number Of Outputs: | 1 | ||
Highlight: | low noise precision op-amp,RRIO 36V operational amplifier,industrial op-amp low offset |
OPA2170AIDR Low Noise Precision RRIO 36V Op-Amp with Low Offset Low Drift Wide Bandwidth & Low Quiescent Current for Industrial Apps
Features
• Supply Range: 2.7 V to 36 V, ±1.35 V to ±18 V
• LowNoise: 19 nV/√Hz
• RFIFiltered Inputs
• Input Range Includes the Negative Supply
• Input Range Operates to Positive Supply
• Rail-to-Rail Output
• Gain Bandwidth: 1.2 MHz
• LowQuiescent Current: 110 µA per Amplifier
• High Common-Mode Rejection: 120 dB
• LowBias Current: 15 pA (Maximum)
• Industry-Standard Packages and micro Packages Available
• Create a Custom Design Using the OPAx170 With the WEBENCH® Power Designer
Applications
• Tracking Amplifier in Power Modules
• Merchant Power Supplies
• Transducer Amplifiers
• Bridge Amplifiers
• Temperature Measurements
• Strain Gauge Amplifiers
• Precision Integrators
• Battery-Powered Instruments
• Test Equipment
Description
The OPA170, OPA2170, and OPA4170 devices (OPAx170) are a family of 36-V, single-supply, low noise operational amplifiers (op amps) that feature micro packages with the ability to operate on supplies ranging from 2.7 V (±1.35 V) to 36 V (±18 V). They offer good offset, drift, and bandwidth with low quiescent current. The single, dual, and quad versions all have identical specifications for maximum design flexibility.
Unlike most op amps, which are specified at only one supply voltage, the OPAx170 family of op amps is specified from 2.7 V to 36 V. Input signals beyond the supply rails do not cause phase reversal. The OPAx170 family is stable with capacitive loads up to 300 pF. The input can operate 100 mV below the negative rail and within 2 V of the positive rail for normal operation. Note that these devices can operate with full rail-to-rail input 100 mV beyond the positive rail, but with reduced performance within 2 V of the positive rail. The OPAx170 op amps are specified from–40°C to +125°C.
INFORMATION
Category
|
|
|
Mfr
|
|
|
Series
|
-
|
|
Packaging
|
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
|
|
Part Status
|
Active
|
|
Amplifier Type
|
|
|
Number of Circuits
|
2
|
|
Output Type
|
Rail-to-Rail
|
|
Slew Rate
|
0.4V/µs
|
|
Gain Bandwidth Product
|
1.2 MHz
|
|
Current - Input Bias
|
8 pA
|
|
Voltage - Input Offset
|
250 µV
|
|
Current - Supply
|
110µA (x2 Channels)
|
|
Current - Output / Channel
|
20 mA
|
|
Voltage - Supply Span (Min)
|
2.7 V
|
|
Voltage - Supply Span (Max)
|
36 V
|
|
Operating Temperature
|
-40°C ~ 125°C
|
|
Mounting Type
|
Surface Mount
|
|
Package / Case
|
8-SOIC (0.154", 3.90mm Width)
|
|
Supplier Device Package
|
8-SOIC
|
|
Base Product Number
|
Drawing
Our advantage :
be sure to meet your need for all kinds of components. ^_^
Product List
Supply a Series of Electronic Components, full range of semiconductors, active & passive Components.We can help you to get all for bom of the PCB,IN a word, you can get one-stop solution here,
The offers including:
Integrated Circuit, Memory ICs, Diode, Transistor , Capacitor, Resistor, Varistor, Fuse, Trimmer & Potentiometer, Transformer, Battery, Cable, Relay, Switch, Connector, Terminal Block, Crystal & Oscillator, Inductor, Sensor, Transformer, IGBT Driver, LED,LCD, Convertor, PCB (Printed Circuit Board),PCBA (PCB Assembly)
Strong in Brand:
Microchip, MAX, AD, TI, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc
Contact Person: Mrs. Natasha
Tel: 86-13723770752
Fax: 86-755-82815220