TOP is a professional electronic components distributor in China.
we offer one-stop solution service , from communication modules , antennas , PCB , PCBA , and all components for PCB Bom.
|
Product Details:
Payment & Shipping Terms:
|
| Function: | Step-Up, Step-Down | Output Configuration: | Positive Or Negative |
|---|---|---|---|
| Topology: | Buck, Boost | Output Type: | Adjustable |
| Number Of Outputs: | 1 | ||
| Highlight: | MAX97220AETE+T stereo amplifier IC,3W Class D audio amplifier,I2C control low THD+N amplifier |
||
MAX97220AETE+T 3W/Ch Stereo Amp 105dB PSRR >100dB SNR 93% Efficient Class D I2C Control Ultra-Low THD+N Tiny 16-TQFN Advanced Click/Pop Suppression
Features
Output Power 125mW into 32I with a 5V Supply
3VRMS Output Drive into 1kI with a 5V Supply
2VRMS Output Drive into 600I with a 3.3V Supply
Fully Differential Inputs
Fixed or Externally Adjustable Gain with No Clicks or Pops
Wide 2.5V to 5.5V Operating Range
DirectDrive Outputs Eliminate DC-Blocking Capacitors
Flat THD+N, Better Than 90dB in the Audio Band
18-Bit SNR Performance, 112dB
Footprint Compatible with the MAX9722
Applications
Simple Multimedia Interfaces
Set-Top Boxes
Blu-ray™ and DVD Players
LCD Televisions
Prosumer Audio Devices
Description
The MAX97220_ is a differential input DirectDrive® line driver/headphone amplifier. This device is capable of driving line level loads with 3VRMS into 1kI with a 5V supply and 2VRMS into 600I loads from a 3.3V supply. A headphone load is capable of being driven with 125mW into 32I with a 5V supply. The IC is offered with an inter nally fixed 6dB gain or an externally set gain through external resistors. The external gain setting nodes can also be used to configure filters for set-top box applica tions. The IC has exceptional THD+N over the full audio bandwidth.
Two versions of the IC are available with different turn on times (tON). The A, C, and E versions for headphone applications feature a tON of 5.5ms while the B and D versions, intended for set-top-box applications, feature a 130ms tON. An on-chip charge pump inverts the power supply input, creating a negative rail. The output stage of the amplifier is powered between the positive input sup ply and the output of the charge pump. The bipolar sup plies bias the output about ground, eliminating the need for large, distortion-introducing output coupling capaci tors. The IC powers on and off without clicks or pops. The IC is available in a 3mm x 3mm x 0.8mm, 16-pin TQFN and is specified over the extended -40NC to +85NC temperature range.
INFORMATION
|
Category
|
|
|
|
Manufacturer
|
Analog Devices Inc./Maxim Integrated
|
|
|
Series
|
|
|
|
Packaging
|
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
|
|
|
Part Status
|
Active
|
|
|
Type
|
Class AB
|
|
|
Output Type
|
Headphones, 2-Channel (Stereo)
|
|
|
Max Output Power x Channels @ Load
|
125mW x 2 @ 32Ohm
|
|
|
Voltage - Supply
|
2.5V ~ 5.5V
|
|
|
Features
|
Depop, Differential Inputs, Shutdown
|
|
|
Mounting Type
|
Surface Mount
|
|
|
Operating Temperature
|
-40°C ~ 85°C (TA)
|
|
|
Supplier Device Package
|
16-TQFN (3x3)
|
|
|
Package / Case
|
16-WFQFN Exposed Pad
|
|
|
Base Product Number
|
Drawing
![]()
Our advantage :phones, PDA's, notebook comput.ers
be sure to meet your need for all kinds of components. ^_^
Product List
Supply a Series of Electronic Components, full range of semiconductors, active & passive Components.We can help you to get all for bom of the PCB,IN a word, you can get one-stop solution here,
The offers including:
Integrated Circuit, Memory ICs, Diode, Transistor , Capacitor, Resistor, Varistor, Fuse, Trimmer & Potentiometer, Transformer, Battery, Cable, Relay, Switch, Connector, Terminal Block, Crystal & Oscillator, Inductor, Sensor, Transformer, IGBT Driver, LED,LCD, Convertor, PCB (Printed Circuit Board),PCBA (PCB Assembly)
Strong in Brand:
Microchip, MAX, AD, TI, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc
Contact Person: Mrs. Natasha
Tel: 86-13723770752
Fax: 86-755-82815220